Wednesday, October 2, 2013

Guest Post- Ariel Lauryn- Roast Beef Sandwich Puppet

Today we welcome Ariel Lauryn to the Fake-n-Bake kitchen! Ariel is a funny and talented lady, who does a great job introducing herself, so I'll just let her take it away. Enjoy! -Anna


Hello Proplettes and Fake Food Fanatics!

I am Ariel Lauryn, your guest poster for the day.  I am a Theatre Maker Jane-of-many-trades (I do props, carpentry, painting, puppets, perform, and teach).  But back to our topic, a favorite of mine and yours: fake food! 
Recently, I was out in New York interning with PuppetKitchen (Check them out—no, really.  And watch their videos).  I was granted the opportunity to bring to life a roast beef sandwich puppet, designed by one Michael Schupbach.
 
Here are some pictures!  Figures 1 and 2 are photos of the prototype.  Figures 3 and 4 are the final product. 
Figure 1

Figure 2
Figure 3
Figure 4

Note:  The bread crust in Figures 1 and 2 is just brown Sharpie on the edge of the Poly Foam Bread. 
Note 2 (or, note too):  The lettuce in Figures 1 and 2 is lettuce I made, which is explained below.  The lettuce in Figures 3 and 4 was purchased from displayfakefoods.com.  Because this was a film project, we had to go with rubbery lettuce rather than the plastic lettuce that I made due to the noise that the plastic lettuce made when the sandwich had to speak.  (I love that I deal with things like “the noise the plastic lettuce made when the sandwich had to speak.”)
Note 3:  And this note may be disappointing to some of you.  The roast beef in Figures 3 and 4 is real roast beef. Wah-wah.

Now, I won’t get into patterning the puppet itself, but I will instead focus on making the individual pieces of food that went into it. 

First, the Bread:

Bread Slices
Materials and tools:
For Bread:
1/2” Poly Foam
Razor Blade
Airbrush Paint and Gun (Spray paint will do, it will just get you less detail ability)

1.      Cut bread shape out of foam.
2.      With an airbrush, lightly apply yellowish oxide-y paint to outer edges and a very light dusting over the whole slice. 
-If you don’t have an airbrush, just do a light dusting coat of spray paint to add some variety to the foam color.

For Crust:  (This is for the fancy crusts in Figures 3 and 4)
Sculpt-or-Coat
Matte Gel Medium (Sculpt-or-Coat will do if you don’t already have Gel Medium, it will just be a little shinier—I bet a matte spray might work to dull it)
Corn Meal (Optional)
Acrylic or Latex Paint

1.      Apply a thick coat of Sculpt-or-Coat to the edges of the bread and let dry.
2.      Repeat to desired thickness or until the foam texture is covered.
3.      Paint.
4.      Apply a very light coat of Matte Gel Medium or Sculpt-or-Coat.
5.      Optional: when application of Matte Gel Medium or Sculpt-or-Coat of Step 4 is still wet, sprinkle on some Corn Meal and lightly press it in.  Depending on how much the bread will be moved and manipulated, some of the Corn Meal may flake off. (I was tempted to also try sesame seeds or poppy seeds, but ran out of time). 

Here’s a test strip of different textures I tried out on top of the Sculpt-or-Coat:



The texture on the left is cornmeal, and to the right is a combination of foam and sawdust painted brown. 

Tomato Slice
Here’s what I did for the tomato.  Now, I don’t recommend this method if you have to make a lot of them.  This took a good deal of time, but since this puppet was going to be filmed, detail was of the essence. 


Materials and tools:
¼” Poly Foam
Razor Blade
Sculpt-or-Coat
Yellow Pony Beads
Paint (acrylic or latex)
Clear Coat Spray

1.      Cut tomato slice shape out of 1/4” poly foam.
2.      Carve out innards to varying depths.
3.      Apply a thick coat of Sculpt-or-Coat to fill in some of the foam, but not the innards. And I mean soak the sucker.  Set aside to dry.  This’ll take a while, so go be productive elsewhere.  Listen to a podcast, or something
4.      Once the Sculpt-or Coat is dry, paint a base coat of pinkish white, slightly darker brownish yellow in the innards.
5.      Add any paint detail to Pony Beads.
6.      Fill the innards with Sculpt-or-coat.  Press in some pony beads for seeds. Set aside to dry.
7.      Final paint coat. 
8.      Spray with Clear Coat for glossy shine. 
9.      Go brag to your co-workers about the tomato slice you just made. 


Lettuce
Fast, Cheap, Easy—a great combo!

Materials and tools:
Floral Cellophane (just Google that or go to a florist shop, they’ll probably have it)
Heat Gun
Steel Rod—1 ft long
Spray Paint
Acrylic or Latex paint (Optional)

1.      Cut out the basic shape of the lettuce you want.
2.      Place the steel rod (I used a threaded rod we just had around the shop) down the center of the leaf length-wise.  This will create a general shape for the rib of the lettuce.
3.      Here’s where the playing comes in:  Use the heat gun or blow dryer (a blow dryer takes longer, but might give you a bit more control) to melt the plastic.  The plastic will curl up, depending on the heat, the cut of the edges, and how close the gun is to the plastic.  Play with the angle that you use to hold the heat gun.  I generally had the air blowing from the bottom of the leaf up to the top. 
4.      Wait for the leaf to cool (it won’t take long) and use a leather glove to remove the steel rod (that will take longer to cool!).
5.      Paint!  If the leaf is going to move around a lot, lightly sand the plastic.  But if you know it will be stationary, I’d recommend not sanding—it will leave your leaf shinier.  Speaking of, if you want a shinier leaf, only paint one side.  That way, the unpainted side will still have the plastic sheen!
6.      Use varying shades of green spray paint to suit your lettuce.
7.      If you want super ultra detail, you can paint on some veins with acrylic or latex paint. 

Onions

Note: These particular onion cuties were made by Daniel Dempsy, a fellow intern at Puppet Kitchen.

Materials:
1/8” Plastazote* (White Fun Foam would probably work, too.  Plastazote just has a nice translucency to it)
Purple Sharpie
Light Yellow Sharpie
Gloss Gel Medium (Sculpt-or-Coat might work)

1.      Cut a circle out of the Plastazote.
2.      Cut a spiral in the circle.
3.      Use the Purple Sharpie to color the edges of the spiral
4.      Use the Light Yellow Sharpie to color in the center.  Draw in spokes like a bicycle rather than fully coloring it in.
5.      Use Gloss Gel Medium to coat the onion—this seals in the sharpie so it is less likely to rub off and stain the food props around it.


* For those of you who have never worked with Plastazote, I found this webpage that has a pretty good explanation of it (Do note that I did not purchase from this site, we used material we already had in stock. I note this webpage just for reference.)

Cheese (Cheese, Gromit!)

Note: The cheese made for this sandwich was made by Jamie Sunwoo, another fellow intern at Puppet Kitchen.

Materials:
1/8” Plastazote (Again, same note about Fun Foam as the Onion)
Paint (Acrylic or Latex)
Sealer (Gloss Gel Medium or Sculpt-or-Coat)

1.      Cut out a square of the Plastazote.
2.      Paint to your liking.
3.      Lightly coat with the sealer of your liking.

All photography credits go to The Puppet Kitchen. 

Prop on, Prop Tarts!



1 comment:

Categories

props (35) fakery (31) faux (25) food (25) fakefoodfriday (24) theater (24) Fake Food Friday (22) cake (10) foam (9) kitchen (9) caulk (7) Albert Herring (6) casting (6) insulation foam (6) opera (6) Design Master (5) Smooth-On (5) booze (5) desserts (5) drink (5) edible (5) jaxsan (5) microfoam (5) molding (5) acrylic (4) carve (4) ham (4) resin (4) acrylic caulk (3) beverage (3) candy (3) cheese (3) cocktail (3) dressing (3) fruit (3) latex (3) model magic (3) period (3) upholstery foam (3) urethane (3) vintage (3) Helena Mestenhauser (2) Ilana Kirschbaum (2) Sarah Heck (2) acrylic paint (2) appetizers (2) brownie (2) casserole (2) chocolate (2) confection (2) decorating (2) dial (2) ephemera (2) fish (2) flower (2) foam sheet (2) gel wax (2) hot pour vinyl (2) leg (2) link (2) mocktail (2) mother mold (2) pies (2) pizza (2) reference (2) research (2) safe (2) salt dough (2) sandwiches (2) tutorial (2) wrappers (2) Canapes (1) David Russell (1) Dowel (1) Dragonskin (1) Ellie Bye (1) FX (1) Flex Foam-It (1) Fritos (1) Introduction (1) JT Ringer (1) Jess Smith (1) Keli Sequoia (1) Materials Monday (1) Oona Tibbetts (1) Poultry (1) Sara Pool (1) Serena Yau (1) Skylight (1) Smoothcast 325 (1) Turkey (1) Victoria Ross (1) Wonderflex (1) Worbla (1) alcohol (1) alginate (1) apoxie (1) aspic (1) banana (1) bead foam (1) bread (1) bundt (1) cabbage (1) carnation (1) cellophane (1) champagne (1) cheesecake (1) cherries (1) chilaquiles (1) citrus (1) clear (1) coat (1) coke (1) cola (1) contact adhesive (1) cork (1) cotton batting (1) cream (1) drinks (1) dumplings (1) fake steam (1) faux mex (1) flexcoat (1) fondant (1) fruit salad (1) glass (1) great stuff (1) gum paste (1) hands (1) herring (1) hors D'ouevres (1) icing (1) intern (1) joke (1) katie webster (1) kolache (1) labels (1) lettuce (1) life casting (1) liquid (1) martinis (1) marzipan (1) meat pie (1) menu (1) mini fogger (1) mini mister (1) nougat (1) olive (1) olives (1) oranges (1) pan dulce (1) paraffin (1) pastries (1) pastry (1) peas (1) petit fours (1) pickled herring (1) pie (1) pie crust (1) pineapple (1) prosciutto (1) punch (1) restaurant (1) samosas (1) sculpey (1) shrimp (1) small pastries (1) snacks (1) soda (1) sorbet (1) spilled (1) stage effects (1) sugarplums (1) sweetmeats (1) sweets (1) taco (1) tomato (1) tuna (1) tv dinner (1) vacuform plastic (1) violets (1) wax (1) welcome (1)